SLM国产CoCr合金机械性能和金瓷结合强度的研究

向秋叙; 王璐; 谭发兵

doi:10.16016/j.1000-5404.201810080

您当前的位置：

首页 >

文章列表页 >

SLM国产CoCr合金机械性能和金瓷结合强度的研究

生物医学工程 | 更新时间：2026-01-09

- SLM国产CoCr合金机械性能和金瓷结合强度的研究
- Mechanical properties and porcelain bond strength of a new domestic CoCr alloy based on selected laser melting
- 第三军医大学学报 2019年41卷第5期页码：502-506, 封三
- 作者机构：
  
  1.400015 重庆，重庆医科大学附属口腔医院:修复科
  2.400015 重庆，口腔疾病与生物医学重庆市重点实验室
  3.400015 重庆，重庆市高校市级口腔生物医学工程重点实验室
  4.400015 重庆，重庆医科大学附属口腔医院:修复工艺科
- 作者简介：
  
  [谭发兵，E-mail:xiaosongtan1983@163.com TAN Fabing, E-mail:xiaosongtan1983@163.com
- 基金信息：
  
  国家重点研发计划(2016YFC1100503);重庆市科卫联合项目(2018MSXM061);重庆市教委科学技术研究项目(KJQN201800421);2016年重庆高校创新团队建设计划资助项目(CXTDG201602006)
- DOI：10.16016/j.1000-5404.201810080
  中图分类号： R783.1
- 收稿：2018-10-15，
  
  修回：2018-12-19，
  
  纸质出版：2019-03-15
- 稿件说明：
移动端阅览
向秋叙, 王璐, 谭发兵. SLM国产CoCr合金机械性能和金瓷结合强度的研究[J]. 第三军医大学学报, 2019,41(5):502-506, 封三.

Qiuxu XIANG, Lu WANG, Fabin TAN. Mechanical properties and porcelain bond strength of a new domestic CoCr alloy based on selected laser melting[J]. Journal of Third Military Medical University, 2019, 41(5): 502-506, 封三.
向秋叙, 王璐, 谭发兵. SLM国产CoCr合金机械性能和金瓷结合强度的研究[J]. 第三军医大学学报, 2019,41(5):502-506, 封三. DOI： 10.16016/j.1000-5404.201810080.

Qiuxu XIANG, Lu WANG, Fabin TAN. Mechanical properties and porcelain bond strength of a new domestic CoCr alloy based on selected laser melting[J]. Journal of Third Military Medical University, 2019, 41(5): 502-506, 封三. DOI： 10.16016/j.1000-5404.201810080.

摘要

目的

评估基于选区激光融化(selective laser melting，SLM)技术的国产CoCr合金试件的机械性能和金瓷结合强度。

方法

采取SLM技术和铸造法构造哑铃试件(0°，45°和90°)和金瓷结合试件。在室温下进行拉伸实验并观察断面形貌；通过三点弯测试检测金瓷结合强度并分析金瓷界面特征。

结果

铸造组、国产SLM组和进口SLM组的弹性模量、抗拉强度和断后伸长率间有统计学差异(

0.05)；SLM组中，不同构造角度间的弹性模量、抗拉强度和断后伸长率之间无统计学差异；金瓷结合强度方面，铸造组[(30.78±3.23)MPa

]

，进口SLM组[(39.31±3.32)MPa

]

、国产SLM组[(53.89±5.60)MPa

]

3组间差异有统计学意义(

0.05)。

结论

国产SLM组能获得与进口SLM组相当的机械性能；国产SLM组的金瓷结合强度优于进口SLM组和铸造组，能满足临床使用的需求。

Abstract

Objective

To evaluate the mechanical properties and porcelain bond strength of domestic CoCr alloy specimens based on selected laser melting (SLM) technology.

Methods

SLM technology was used to construct dumbbell specimens (0°

45° and 90°) and ceramic specimens. The cast specimens of the same size were made by traditional casting method. Tensile test was carried out at room temperature and the shape of the microstructure was observed. The porcelain bond strength was measured by a three-point bend test

and the metal-ceramic interface was observed by scanning electron microscopy.

Results

There were significant differences in mechanical properties (including elastic modulus

tensile strength and elongation) among the casting group

the domestic SLM group and the imported SLM group (

0.05). In the SLM group

there was no significant difference in elastic modulus

tensile strength and elongation among different fabricated angles. The porcelain bond strength of casting group was 30.78±3.23 MPa

which was lower than that in the imported SLM group (39.31±3.32 MPa) and the domestic SLM group (53.89±5.60 MPa

0.05).

Conclusion

The domestic SLM group obtains the similar mechanical properties to the imported SLM group. It has higher bonding strength than the other 2 groups

and can meet the needs of clinical use.

关键词

Keywords

references

连梅菲, 冯云枝, 苏宁波, 等.全瓷修复与烤瓷修复临床效果比较的Meta分析[J].实用口腔医学杂志, 2016, 32(6):815-822. DOI:10.3969/j.issn.1001-3733.2016.06.015.

LIAN M F, FENG Y Z, SU N B, et al .Clinical effect of all-ceramic restorations and metal-ceramic restorations:A Meta-analysis[J ] .J Pract Stomatol, 2016, 32(6):815-822.DOI:10.3969/j.issn.1001-3733.2016.06.015.

VAN NOORT R. The future of dental devices is digital[J].Dent Mater, 2012, 28(1):3-12.DOI:10.1016/j.dental.2011.10.014.

LINDNER M, HOEGES S, MEINERS W, et al .Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique[J ] .J Biomed Mater Res A, 2011, 97(4):466-471.DOI:10.1002/jbm.a.33058.

ALKMIN L B, NUNES C A, SANTOS C D, et al . Microstructural evidence of beryllium in commercial dental Ni-Cr alloys[J ] . Mat Res, 2014, 17(3):627-631.DOI:10.1590/S1516-14392014005000018.

CHEN W C, TENG F Y, HUNG C C. Characterization of Ni-Cr alloys using different casting techniques and molds[J]. Mater Sci Eng C Mater Biol Appl, 2014, 35:231-238.DOI:10.1016/j.msec.2013.11.014.

WU L, ZHU H, GAI X, et al . Evaluation of the mechanical properties and porcelain bond strength of cobalt-chromium dental alloy fabricated by selective laser melting[J ] . J Prosthet Dent, 2014, 111(1):51-55.DOI:10.1016/j.prosdent.2013.09.011.

SUNDAR M K, CHIKMAGALUR S B, PASHA F. Marginal fit and microleakage of cast and metal laser sintered copings-an in vitro study[J ] .J Prosthodont Res, 2014, 58(4):252-258.DOI:10.1016/j.jpor.2014.07.002.

AL JABBARI Y S, KOUTSOUKIS T, BARMPAGADAKI X, et al . Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting[J ] . Dent Mater, 2014, 30(4):e79-e88.DOI: 10.1016/j.dental.2014.01.008.

苏海军, 尉凯晨, 郭伟, 等.激光快速成形技术新进展及其在高性能材料加工中的应用[J].中国有色金属学报, 2013, 23(6):1567-1574.DOI:10.19476/j.ysxb.1004.0609.2013.06.012.

SU H J, WEI K C, GUO W, et al .New development of laser rapid forming ant its application in high performance materials processing[J ] . Chin J Nonferrous Metal, 2013, 23(6):1567-1574.DOI:10.19476/j.ysxb.1004.0609.2013.06.012.

孙婷婷, 杨永强, 苏旭彬, 等.316L不锈钢粉末选区激光熔化成型致密化研究[J].激光技术, 2010, 34(4):443-446.DOI:10.3969/j.issn.1001-3806.2010.04.004.

SUN T T, YANG Y Q, SU X B, et al .Research of densification of 316L stainless steel powder in selective laser melting process[J ] .Laser Technol, 2010, 34(4):443-446.DOI:10.3969/j.issn.1001-3806.2010.04.004.

陈光霞, 覃群.选择性激光熔化快速成型复杂零件精度控制及评价方法[J].组合机床与自动化加工技术, 2010(2):102-105.DOI:10.3969/j.issn.1001-2265.2010.02.028.

CHEN G X, QIN Q.Controlling and evaluation of precision of complex components produced by SLM[J].Modul Mach Tool Automat Manuf Tech, 2010(2):102-105.DOI:10.3969/j.issn.1001-2265.2010.02.028.

MONROY K, DELGADO J, CIURANA J. Study of the pore formation on CoCrMo alloys by selective laser melting manufacturing process[J].Procedia Eng, 2013, 63:361-369. DOI:10.1016/j.proeng.2013.08.227.

KAJIMA Y, TAKAICHI A, NAKAMOTO T, et al . Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting[J ] . J Mech Behav Biomed Mater, 2016, 59:446-458.DOI:10.1016/j.jmbbm.2016.02.032.

LIU Y, WANG Z, GAO B, et al .Evaluation of mechanical properties and porcelain bonded strength of nickel-chromium dental alloy fabricated by laser rapid forming[J ] .Lasers Med Sci, 2010, 25(6):799-804.DOI:10.1007/s10103-009-0690-3.

BAE E J, KIM J H, KIM W C, et al . Bond and fracture strength of metalceramic restorations formed by selective laser sintering[J ] . J Adv Prosthodont, 2014, 6(4):266-271. DOI:10.4047/jap.2014.6.4.266.

吴峻岭.新型牙用烤瓷支架钴铬合金金瓷结合的研究[D].成都: 四川大学, 2005. [http://cdmd.cnki.com.cn/Article/CDMD-10610-2005147409.htm .

WU J L. A study of metal-ceramic bonding on a new type of cobalt-chromium alloy for both dental framework and porcelain fused to metal[D].Chengdu: Sichuan University, 2005.

浏览量

下载量

CSCD

文章被引用时，请邮件提醒。

提交

工具集

关联资源

暂无数据